EMT-SDB eBox is a powerful and smart data acquisition and logger that can be integrated with almost any kind of sensors and system. SDB software and hardware can cater the requirement of Automated Weather Information System where each eBox can be integrated with 4 to 7 different sensors at one time. Additional analog to TCP-IP converter can extend the number of sensors connected to SDB-100 at one time. The Firmware of eBox SDB interacts directly with sensor data in the form of ASCII, pulse and voltage. The outputs of these data are channeled to the processing engine before the final data is sent to the destination server. These are the feature modules: TCP-IP data streaming; data sync capability to recover missing data due to communication loss; advanced regular expression, and, parser to collect data from intelligent sensor.
| General | |
| CPU | Low Power 64-bit TS-7250V3 |
| CPU Speed | 200 MHz |
| RAM | 64 MB |
| External Storage | 8 GB |
| Data Acquisition & Control | |
| Digital Input/Output | 30X |
| Analog to Digital | 2X |
| Interface | |
| PC/104 Bus | 1X |
| 10/100 Ethernet | 1X |
| USB Host | 2X |
| Serial/COM Port | 6X |
| RS485 Port | 1X |
| SPI Bus | 1X |
| 4-20mA | 2X |
| On Board Device | |
| Replaceable RTC | 1X |
| Watchdog Timer | 1X |
| Temperature Sensor | 1X |
| Operation Temperature | |
| Fanless Temp Range | -40°C to 85°C |
| Power Details | |
| Min Power Consumption | 0.50 Watt |
| Max Power Consumption | 3.00 Watt |
| Power Supply | 4.5 – 24VDC |
| Reverse Voltage Protection | Yes |
| Overcurrent Protection | Yes |
| Dimensions and Material | |
| Weight | 46g |
| Dimensions | 58 x 74 x 22 mm |
| Case Material | Metal |
| Wiring | Spring Clamp Terminal Block |
